Safety instructions
GBSOTXBA_V(1).DOCX
Page - 10
2.6 General safety measures during maintenance and servicing
•
Repair work to electrical equipment of the device must only be carried out by a
trained electrician!
•
Switch the device off and disconnect it from the power supply before carrying out
any maintenance and repair work!
Caution: This also applies to the repeater, if used.
3 General information
3.1 Instructions for positioning the machine
Before commissioning the device, please give some thought as to where the sorting shelf system should be
positioned.
•
The sorting shelf system should be positioned on a firm, flat surface.
•
Frames for laundry receipt/expediting must be screwed firmly to the floor using the holes provided in the two
side parts (fastening material not included in the scope of supply)
Fig. 2 Fastening the frame
•
Screw the mounting system for the laundry receipt area firmly to the wall using the provided fastening
brackets (further fastening material not included in the scope of supply)
•
Control unit:
Screw to the wall or take suitable precautions (e.g. mounted flat on the desk top) to make sure that there is
no risk of it falling down.
•
The device may only be used in dry, indoor areas.
•
The machine must not be positioned in an explosive environment.
