Note to current users of ThermaData Studio
Software: Remove old versions of ThermaData
Studio software prior to installing new version (your
data files will not be removed or lost)
PC SOFTWARE INSTALLATION
Please note: Due to regular software updates, please
visit the download page on our website
www.thermoworks.com/software to ensure you
have the latest version.
ThermaData Studio PC Software requires Microsoft
.Net Framework to be installed on the PC. Some PC's
will already have this installed. Click the 'Accept'
button in the 'Microsoft License window'. (This may
take a few minutes to install). When installed, the
ThermaData Studio software installation will resume.
When the 'ThermaData Studio Software Setup
Wizard' box appears, click the ‘Next’ button.
The program files will be installed by default to... 'C:\
Program Files\Thermoworks Inc\ThermaData Studio\'
(recommended).
The 'Change…' button can be used to install to an
alternate location (Advanced Users).
When the 'Custom Setup' box appears, click the
'Next' button (Thermocouple ThermaData Loggers do
not require drivers).
The final installation dialogue box gives a last
opportunity to go back and revise the installation
settings. Click the 'Install' button to install the
software. A moving bar will show the installation
progress.
Click the 'Finish' button to exit the installation
procedure.
The icon for the ThermaData Studio software will
be placed on the desktop. A ThermaData Studio
shortcut will be placed in 'Start menu' - 'Programs' -
'Thermoworks Inc'.
SETTING UP THE LOGGER
Connect the logger to the PC using the 'USB' cable
provided.
Click on the ThermaData Logger TC Tab
Select the Logger Settings Icon Enter a name for the
logger in the Title (User ID) box.
Select temperature settings for 'over' or 'under' alarm
using the drop-down menu boxes.
Select the logging interval (The total time the log will
last is shown below the drop-down box).
Select the Start method (Manual, Delay, Date &
Time).
Select the Stop method (Software, Readings, Date
& Time).
Click the 'Send Settings' button.
Start the logger by clicking the 'Start’ button on the
PC screen or by pressing the button on the logger
until the LEDs flash.
READING THE LOGGER
Connect the logger to the PC using the 'USB' cable.
Select 'New Document' from the drop-down
'Download' menu.
'View' readings using data window or graph window.
Current logger status can be viewed by pressing/
clicking the status button (tab).
Full operating instructions can be found in the
ThermaData Studio Software.
Please note: This logger is fitted with a user-
replaceable SL-760 AA 3.6V Tadiran battery (THS-
839-105) available at thermoworks.com. Failure to
use the same type of battery will result in an error
with the logger.
WARNING: IPA (Isopropyl Alcohol) and other
solvents may cause damage to the case and screen
of this instrument.
