71
Clear Balance (Temporary Settings Control)
Any changes in the
BALANCE
menus are, by default, temporary. When a different
INPUT
SELECT
button is pressed
or the Casablanca IV is put into standby, all changes will be reset to zero. This feature can be overridden by pressing
button #
3
in the first
SETUP
/
GLOBAL
page (figure 46 on page 69) and set to
OFF
. When this parameter is set to
OFF
,
all
BALANCE
menu settings will remain as the user changes inputs or puts the Casablanca IV into standby.
RS232
In the first
SETUP
/
GLOBAL
page, press button #
4
to access the
RS232
submenu shown in figure 49..
Figure 49 - Front Panel Display of the SETUP
/
GLOBAL
/
RS232 Submenu
Press button #
1
(
BAUD
) and use the
LEVEL UP
/
DOWN
buttons to select the Baud rate that matches that of the RS232
controller. The factory default value is 115.2K.
The recommended setting is 9600.
The Casablanca IV can be set to automatically feedback to the RS232 port. Button #
2
(
ECHOS
) [Echo Status] allows
the user to enable or disable the output of data to the RS232 port and, if enabled, determine which level, or pre-
determined group of bytes, it outputs. This can be done by selecting a “Status Level”, which means if any Casablanca
IV parameter changes, that level's bytes will be sent to the port. This is useful for monitoring master level, input and the
like when the user has access to both the Casablanca IV and the touch-panel controller, to keep them synchronized. If
this value is
OFF
, no parameter change information will output to the RS232 port.
Status levels 1, 2, 3 and 4 permit increasing levels of data to be sent to the RS232 port. If RS232 is not being used,
ensure that the Echo Status (
ECHOS
) parameter is set to
OFF
. Higher settings can slow the operation of the Casablanca
IV.
An RS232 Protocol addendum which describes all pertinent RS232 information, including values contained within each
Status Level is available for download from the Theta Digital website, in the “Library” section. (
www.thetadigital.com
)
The recommended settings are 9600 Baud with Echoes set to 2.
Summary of Contents for Casablanca IV
