77
STATUS Function
This feature, accessible from the hand held remote or RS232 control device, provides the user with a ‘quick
view’ of the most pertinent current settings of the Casablanca IV. It is available from any menu or submenu
by pressing the
STATUS
button. While viewing the Status pages, the
INPUT
SELECT
buttons (
1
-
6
) are
inactive. Pressing a function button will clear the
STATUS
display and show the current function menu.
Figure 56 - Front Panel Display of the STATUS Display
When the
STATUS
display is activated, the following will always appear in the VFD, as shown in figure 59.
•
The current
MODE
(Default or temporary).
•
The currently selected input jack name (
SRCE
, or Source).
•
The analog
TAPE
OUT
audio source to be recorded, by Input jack name.
•
The
PHASE
parameter value of
+
(0
°
) or
-
(180
°
).
•
The Sample Rate (
SRTE
) of the signal currently being received.
•
The Master Volume (
LVL
) setting.
Press the
A-D
button once to display the Dolby Digital Status page, an example of which is shown in figure 60.
Figure 57 - Front Panel Display of the STATUS
/
Dolby Digital Display
The Dolby Digital status displays information that may be embedded in the Dolby Digital datastream. The
information can be correct only if a Dolby Digital source is active. Each parameter on the first page is described
below:
Channels (
CHANS
): Displays the number of main channels in the source signal.
LFE
: Displays whether an LFE track is present or not.
Surround Mode (
SMODE
): Displays the surround mode. See
SETUP
/
INP
Page 2
/
DOLBY DIGTL
Page 1
,
parameter value of
2CHEN
and
2CHNEN
for Casablanca IV’s use of this parameter. This can be found on
page 66.
Summary of Contents for Casablanca IV
