Installation Manual 8
2. Change the position of the hinges:
- Remove the screws from the upper hinge [159].
- Put this hinge on the other side as the lower hinge.
- Attach the hinge with the screws.
- Turn the lower hinge pin down into this hinge.
- Remove the screws from the lower hinge [160].
- Remove the screws from the travel latch [161].
- Put this hinge on the other side as the upper hinge.
- Attach the hinge with the screws.
3. Change the position of the travel latch (See Art02534, Art01571, and
Art00978):
- Put the travel latch on the other side of the refrigerator.
- Attach the travel latch with the screws.
- Remove the screw [41] from the travel latch plate [162] on the door.
- Remove the screw [41] from the filler plate [163] on the door (N404M, N504M).
- Pull each hinge bushing [74] out of the hole in the door (N304M).
- Pull the plastic plug out of the top of the door (N304M).
- Put the travel latch plate on the other side of the door.
- Attach the travel latch plate with the screw.
- Put the filler plate on the other side of the door (N404M, N504M).
- Attach the filler plate with the screw. (N404M, N504M)
- Push the plastic plug into the whole on the other side at the top of the door (N304M).
- Push each hinge bushing [74] into the hole on the other side of the door (N304M).
4. Install the door:
- Put the door down onto the lower hinge pin.
- Align the holes in the upper hinge and the filler plate and hold in this position.
- Screw the upper hinge pin down into the upper hinge and into the door.
- Tighten all of the screws.
- Make sure the travel latch fully engages the travel latch plate.
- The travel latch should engage the travel latch plate 5 mm.
- If not, loosen the screws and adjust the height of the travel latch.
- Tighten the screws.
Art01571
162
163
41
159
63
160
64
161
ART 02534
74
162
74
Art00978
