OPERATING INSTRUCTIONS
TM-CHAIN BLOCKS
B07725-G
EN 06.2022
10 | 12
7.5
Replacement of the suspension hook
The housing must be opened in order to replace the suspension hook.
Therefore, this work should only be performed by an authorized expert.
In such a case, please contact the service address.
7.6
Gearbox
The gearbox is maintenance-free.
If the gearbox has been disassembled, make sure that it is sufficiently lubricated and that the two
gear wheel stages (position 4) are positioned correctly. These are each marked on the side of the
toothing (e.g. "S" or "0"), which are to be positioned in the same orientation according to a clock
hand during assembly.
7.7
Disposal
Dispose of worn out chain blocks and accessories for scrapping in accordance with local
regulations.
