© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021841/07/18
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·
Page 2 of 8
Safety Instructions
•
Before operating with or at the device/product, read through the operating instructions.
This manual contains instructions which should be followed on mounting, start-up, and operation.
A non-observance might cause:
- failure of important functions
- endangerment of persons by electrical or mechanical effect
- damage to objects
•
Mounting, electrical connection and wiring of the device/product must be carried out only by a qualified
technician who is familiar with and observes the engineering regulations, provisions and standards
applicable in each case.
•
Repairs and maintenance may only be carried out by trained staff or
Adolf Thies GmbH & Co. KG
.
Only components and spare parts supplied and/or recommended by
Adolf Thies GmbH & Co. KG
should be used for repairs.
•
Electrical devices/products must be mounted and wired only in a voltage-free state.
•
Adolf Thies GmbH & Co KG
guarantees proper functioning of the device/products provided that no
modifications have been made to the mechanics, electronics or software, and that the following points
are observed:
•
All information, warnings and instructions for use included in these operating instructions must be
taken into account and observed as this is essential to ensure trouble-free operation and a safe
condition of the measuring system / device / product.
•
The device / product is designed for a specific application as described in these operating instructions.
•
The device / product should be operated with the accessories and consumables supplied and/or
recommended by
Adolf Thies GmbH & Co KG
.
•
Recommendation: As it is possible that each measuring system / device / product may, under certain
conditions, and in rare cases, may also output erroneous measuring values, it is recommended using
redundant systems with plausibility checks for
security-relevant applications
.
Environment
•
As a longstanding manufacturer of sensors Adolf Thies GmbH & Co KG is committed
to the objectives of environmental protection and is therefore willing to take back all
supplied products governed by the provisions of "
ElektroG
"
(
German Electrical and
Electronic Equipment Act) and to perform environmentally compatible disposal and
recycling. We are prepared to take back all Thies products concerned free of charge if
returned to Thies by our customers carriage-paid.
•
Make sure you retain packaging for storage or transport of products. Should
packaging however no longer be required, please arrange for recycling as the
packaging materials are designed to be recycled.
Documentation
•
© Copyright
Adolf Thies GmbH & Co KG
, Göttingen / Germany
•
Although these operating instructions have been drawn up with due care,
Adolf Thies GmbH & Co
KG
can accept no liability whatsoever for any technical and typographical errors or omissions in this
document that might remain.
•
We can accept no liability whatsoever for any losses arising from the information contained in this
document.
•
Subject to modification in terms of content.
•
The device / product should not be passed on without the/these operating instructions.
