© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021841/07/18
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·
Page 5 of 8
After approx. 3 minutes, the IP-address should adjust to the address which has been
assigned by the local network. Further steps for startup, see from 1.3
1.2 Start with Network without DHCP Support
After the start of the datalogger, please scroll into the dialogue for the display of the IP-
settings by means of the display keys.
Ausstattung:
The IP-settings must be carried out manually in the following step.
1. Please press the button
2. Enter the password 00000234, and press OK
3. Please press again button
afterwards, and select entry DHCP
4. Reset entry DHCP to 0
5. Afterwards, adjust the IP-address, the subnet mask, and the gateway to your
network. You will receive the respective data from your network administrator
6. Now, restart the DLU
Continue with step 1.3.
Password entry:
00000234
Ok
abort
Figure 3: Dialogue for Display of IP-settings
Figure 4: Password entry
1/14
IP-Adresse : 192.168.002.027
Subnetz : 255.255.252.000
Gateway : 192.168.004.027
DHCP : 1
