© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021821/08/21
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·
Page 8 of 102
The Data logger DLU is a complete measurement system for the acquisition, processing and
saving of the measurement data from a wide variety of sensors, like e.g.
-
Precipitation sensors with pulse outputs.
-
Sensors with measuring resistance (e.g. Pt100 temperature sensor).
-
Analogue humidity sensors (±2.4V).
-
Analogue sensors (±10V or ±20mA).
-
Serial sensors (e.g., combi sensors with serial interface).
The following interfaces are used for commands and data output:
-
Micro USB (see
Figure 1,
marking
).
-
Ethernet (see
Figure 1,
marking
).
-
COM1 (dependent on the configuration).
-
COM2 (dependent on the configuration).
The output of the data can also take place via a memory card (SD card).
-
USB (see
Figure 1
, marking
) is used for the accessory USB WLAN antenna.
The points 1 to 4 mark the positions of the input/output interfaces in the housing:
Slave micro USB connection (USB 2.0 micro B jack)
SD card slot
Network connection (RJ45 jack)
Master USB connection (USB 2.0 type A jack)
4
3
2
1
Figure 2: Layout plan of the connections
