© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
021821/08/21
Tel. +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com ·
Page 79 of 102
9.3 Data Export
The botton
opens the menu for data export.
Via the submenu
, a password can be assigned for the download on the
configuration WEB page. If a password has been assigned, the following login mask opens
first:
After entering the correct password and pressing the button
, or in the case of no
password, a download window will appear that looks like this:
Figure 50: data download via WEB
The start and end date for the period to be read must be specified in the window under
Min.
Date
and
Max. Date
. This can be done using the buttons
or by changing the preset date.
By placing a check mark to the left of the files, it is determined that the file should be
exported. The button
enables further files to be displayed.
Via the button
the download will start. Then a new window opens, in
which it must be determined whether the files should only be opened or saved. If necessary,
another window opens to specify the destination. The
X
in the upper right corner is for
closing the window.
Start- and End-Date
window close
Select data
Download start
Surch data
Measurement value
File decription
