Figure 5 Wiring scheme for pressure monitoring with two sensors and external battery source
7 Replacing the batteries
LPMDL-1102 requires one size A 3,6V batteries. ThingsLog platform has built-in battery monitoring
capabilities. The batteries have to be replaced if the voltage level is under 3.1 V.
Battery is soldered on to the PCB and in order to replace the batteries logger have to be sent to us
for battery replacement.
8 User guide
8.1 Associating logger to a profile
1. In order to perform the initial configuration you should have an account for ThingsLog IoT platform. If
you don’t have an account please go to
https://iot.thingslog.com/signup
and register to the platform.
2. Once registered go to Downloads section or directly visit
https://iot.thingslog.com/thingslog.apk
in
order to get Thingslog Andriod Application.
3. Login into the Andorid app with your username and password.
4. Scan the QR code on the logger label.
Visit us at
www.thingslog.com
