Specifications
Physical
Housing Dimensions
Weight with Battery
Mounting Fastener
2.28 x 1.97 x 0.40 inches (5.8 x 5.0 x 1.0 cm)
0.70 ounces (20 grams)
3M VHB™ Tape or #4/#6 screws (screws not provided)
Environmental
Operating Temperature
Maximum Humidity
32 to 120 °F (0 to 49 °C)
85% non-condensing relative humidity
Sensor Specifications
Frequency
Replacement Battery
Nominal Battery Life
Battery Voltage
Transmitted Indications
433.92 MHz
One CR2032
4 to 6 years
3.0 VDC (Nominal), 2.2 VDC (Low)
Low Battery, Supervision
Specifications subject to change without notice.
Pro Tips
To replace the battery
insert a small screwdriver
into the top or bottom slit. Twist the screwdriver to
seperate the top white cover from the black wall
plate. Replace the battery and reinstall the cover
to the wall plate.
PINPAD – 020
Tech Support:
1-855-76-THINK
(1-855-768-4465)
www.thinkprotection.com
Surface Preparation
• Clean the surface
• Ensure the mounting surface temperature is above
50 °F (10 °C)
3M VHB Tape
works great if the surface is
properly prepared and firm pressure is
applied for over 10 seconds.
