5. Service and Maintenance
5-10
Cooling System’s Safety System and Switches
Cooling System’s Safety System and Switches
Safety Mode For the Cooling System
The cooling system ensures the correct running temperature
for vital components (motor and drive controller). If there is
too little coolant in the system, or the system overheats due
to other factors, the safety mode will be activated to prevent
damage to the components.
Should this happen, the “POWER LIMIT”
warning will illuminate. The vehicle can still be
driven but will have limited power.
! WARNING
If the vehicle is driven when overheated, the temperature can
increase even more and cause the drive system to turn itself
off. This means that steering and braking will be much heavier
and harder to use.
Stop the vehicle and turn off the motor. Check the coolant level
in the cooling system, refill if necessary. If the level is OK, let the
vehicle cool down and then start up. If it overheats again, take it
to your dealer to be checked.
Inertia Sensor
THINK City has an inertia sensor in the motor compartment.
This will cut the power to the traction battery in a collision, or a
powerful mechanical shock resulting from running into a curb
or similar object.
If the inertia sensor has been activated:
If the vehicle is not too damaged and can be driven safely, the
inertia sensor can be re-set by pushing the red button.
Inertia sensor
Summary of Contents for think city
