Extend Distribute Innovate
®
Camera Fiber-Link Extender Manual
34
Rev.
E
, June 2012
Appendix D: Camera Fiber-Link Mounting Template
Each Camera Fiber-Link module can be used as a desk top or wall-mounted device.
Mounting centers are provided with keyhole slots.
(For vertical mounting,
o
rient the units
with fiber and power connectors positioned upwards and MDR-26 and RJ45 connectors
positioned downward
.) Users may choose the most appropriate fasteners and anchors to
mount each unit according to the requirements of each application.
Note: Be sure to leave adequate clearance (3 inch minimum bend radius) for
your Fiber Cable.
Housing Dimensions:
7.0
” long x 5.44” wide x 1.19” high
(177.80 mm x 138.13 mm x 30.16 mm)
The following page contains an actual-size template that is valid for each of the Camera Fiber-
Link units available from
Thinklogical
. You can print a 1:1 copy of this page to help you position
and mount your device. Vital dimensions are shown in inches and [millimeters].
Note: Only the following template (pg. 35) should be used for positioning your
Thinklogical
Camera Fiber-Link device. Other graphic depictions of the devices in
this document are not to scale.
CAMERA
®