®
Q-Series Chassis, Rev. D
13
October 2018
2.5.1. Navigating the Menus
Main Root Menus: Once the system is powered up, the initial chassis display is shown as follows:
Our company name is listed on the first line of the display. The model and software version
(VXX.XX) of the unit is displayed on the second line.
Note:
In the front panel menus, the word CARD is used in place of MODULE, but
refers to the same devices described elsewhere throughout this document.
By pressing the down arrow
you will enter the main menu. There is a separate root menu for each
of the four cards (modules). The main root menu items are displayed with an *. They are as follows:
Once a *root menu item is displayed, you can then use the left arrow
or right arrow
to review
settings or make allowable changes.
The Q-4300 menu functionality is as follows:
The Chassis will display menus for up to 4 cards, plus the System menu. The examples below are for
CARD 1 and the System Menu:
*Card 1
Card1 Tx/Rx
Tx/Rx=
Card1 Desc.
Desc=
Card1 Type
Type=
Card1 Rev
Rev=
Card1 Sw Rev
Rev=
Card1 Serial Number
S/N=
Card1 Temp in C
Card1 SFP
Left
Card1 SFP
Right
Card1 SFP LOS
#21
Status=
Card1 SFP Des OK #21
Status=
*System
Thinklogical
Q4300 RACK CTRL VXX.XX
VXX.XX
*CARD 1
