Page 26
TLX160 Matrix Switch Product Manual
thinklogical
Rev. E, February, 2018
Section 3: Regulatory & Safety Requirements
Symbols found on the product
Markings and labels on the product follow industry-standard conventions. Regulatory markings
found on the products comply with domestic and many international requirements.
Regulatory Compliance
Thinklogical’s
®
products are designed and made in the U.S.A. These products have been tested
by a certified testing laboratory and found to be compliant with the following standards (both
domestic USA and many international locations):
North America
Safety
ANSI/UL 60950-1:2007/03/27 Ed:2 Rev:2011/12/19
CSA C22.2#60950-1: 2007/03/27 Ed: 2 (R2012)
LASER
Safety
CDRH 21 CFR 1040.10
Class 1 LASER Product
Canadian Radiation Emitting Devices Act, REDR C1370
IEC 60825:2001 Parts 1 and 2
Class 1 LASER Product
Electromagnetic Interference
FCC 47CFR Part 15 Subpart B: 2016 Class A
Industry Canada ICES-003: 2016
Australia & New Zealand
This is a Class A product. In a domestic environment this product may cause radio interference,
in which case the user may be required to take adequate measures.
European Union
Declaration of Conformity
Man
ufacturer’s Name & Address:
Thinklogical,
A
BELDEN
BRAND
100 Washington Street
Milford, Connecticut 06460 USA
Th
inklogical’s products comply with the requirements of the Low Voltage Directive 2006/95/EC,
the EMC Directive 2004/108/EC, the RoHS Directive 2011/65/EU, the WEEE Directive
2012/19/EU
and carry the
marking accordingly.
Standards with Which Our Products Comply
Safety
IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
Electromagnetic Emissions
CENELEC EN 55022:2010 +AC:2011
Electromagnetic Immunity
CENELEC EN 55024:2010 +A1:2015
CENELEC EN 55032:2015
EN61000-3-2/: 2000 Harmonics
EN61000-3-3: 2008 Flicker
