2. Locate the data you want to send and right-click the data.
Note:
If you are using the Windows 8.1 operating system, go to the desktop screen first, locate the data
you want to send, and then right-click the data.
3. Select
Send To
➙
Bluetooth Devices
.
4. Select a Bluetooth device, and then follow the instructions on the screen.
Note:
If you use the wireless feature (the 802.11 standards) of your computer simultaneously with a
Bluetooth option, the data transmission speed can be delayed and the performance of the wireless feature
can be degraded.
For more information, refer to the Windows help information system and the Bluetooth help information
system.
Using the NFC connection
NFC is a high-frequency and short-range wireless communications technology. Depending on the
model, your computer might come with an NFC card. By using the NFC feature, you can establish radio
communications between your computer and another NFC-enabled device over a distance no more than a
few centimeters. Before you use the NFC feature, ensure that the
NFC device
option is set to
Enabled
in the ThinkPad Setup program. See “Security menu” on page 98.
By default, the NFC feature is enabled. If you have disabled the NFC feature, do the following to enable
the NFC feature:
•
For the Windows 7 operating system:
1. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 93.
2. Select
Security
➙
I/O Port Access
.
3. Set the
NFC device
option to
Enabled
.
•
For the Windows 8.1 operating system:
1. Go to the desktop and move the pointer to the top-right or bottom-right corner of the screen to bring
up the charms. Then click
Settings
➙
Change PC settings
➙
Network
➙
Radio devices
.
2. Slide the NFC switch to the right to enable the NFC feature.
You can use the NFC feature with NFC supported programs, such as the Lenovo QuickControl program or
the Lenovo QuickCast program.
Presentations and multimedia
You can connect your computer to a projector to give presentations or you can connect your computer
to an external monitor to expand your workspace.
Changing display settings
You can change the display settings, such as the display resolution, font size, and so on.
To change the display settings, do the following:
1. Open Control Panel and click
Appearance and Personalization
.
2. Click
Display
for further configuration.
3. Click
Apply
. The change will take effect after you log off.
43
Summary of Contents for X1 Carbon
