Safety instruction
3
2
1.2 During installation
Keep the PV array covered and the DC circuit breaker
OFF. High voltage will be generated by PV array
exposed under sunshine. All the cables must be
connected firmly.
The inverter must be installed by a qualified electrical
engineer certified by the local authority, and the
installation manual must be read through before
installation. It must be installed according to the local
standard and related standard for an electrical enterprise.
1.3 Operation
●High
voltage is a hazard, make sure keep the device
away from children.
●
Any touch with the device or terminal may cause
electric shock or fire. Please follow all the safety
instructions.
●
A damaged device or system fault can cause electric
shock. Make sure that you have checked the package
and the device before installation to avoid unnecessary
damage or loss.
Be aware of the hot surface while the device is running.
1.4 Repair
Completely switch off the connection between the inverter
and the grid, DC side connection. Wait for 10 minutes
until the internal elements are fully discarged.
Do NOT restart the inverter before all the hazards have
been removed. Please contact your local dealer and
always have licensed trader do the repairing.
1.5 EMC
EMC(ElectroMagnetic Compatibility) means the resistance of a device or
system against generating any ElectroMagnetic interference to the
environment without influencing the normal operation in the ElectroMagnetic
environment.
●
Immunity to the own noise; Immunity to the internal electrical noise.
●
Immunity to the external noise; Immunity to the external ElectroMagnetic
noise.
●Noise
radiation level: influence of ElectroMagnetic radiation to the
environment.
●
The ElectroMagnetic radiation of the inverter is harmful
for health.
●
Please never stay within 20cm from a running inverter
for long.
Safety instruction
Notice
Notice
Caution
Notice
Danger
Danger
Danger
