background image

Important notice

The information in this 
guide is furnished for 
informational use only 
and is subject to 
change without notice. 

ThinkRF Corporation 
assumes no 
responsibility or liability 
for any errors or 
inaccuracies that may 
appear in this document.
No part of this 
publication may be 
reproduced, published, 
stored in an electronic 
database, or transmitted,
in any form or by any 
means, electronic, 
mechanical, recording, 
or otherwise, for any 
purpose, without the 
prior written permission 
of ThinkRF Corporation. 

Trademarks

 

ThinkRF, the ThinkRF 
logo and P120 are 
trademarks of ThinkRF 
Corporation.
All other brand or 
product names are 
trademarks or registered
trademarks of their 
respective companies or 
owners.

ThinkRF Corp

390 March Road
Kanata, ON K2K 0G7
(613) 369-5104

HARDWARE WARRANTY AND LIMITATION OF LIABILITY
Read this warranty carefully before you use the product.

ThinkRF P120 Vehicular Power Conditioner are warranted for workmanship and 
materials for a period of one (1) year from the date of shipment as identified by the 
Customer’s packing slip or carrier waybill.  ThinkRF reserves the right to void the 
warranty on any equipment that has been altered or damaged due to Customer 
negligence, unauthorized repair, misuse of equipment, evidence of physical or 
environmental damage, transportation abuse or removal of any ThinkRF 
identification labels or serial numbers.
It will remain the responsibility of the Customer, having obtained a Return Material 
Authorization (RMA) and shipping instructions from ThinkRF, to return, at the 
Customer's expense, the defective unit to ThinkRF’s repair facilities.  ThinkRF will 
incur shipping charges for the return of warranty repaired equipment.  The RMA 
number can be secured by contacting ThinkRF Customer Service and Support 
(support@thinkrf.com).  If the product does not fall within ThinkRF’s warranty period 
or the product is found to be functioning as designed, then under the terms of 
ThinkRF’s warranty policy, all costs of repairs and shipping will be charged directly 
to the Customer.  ThinkRF will warrant repaired units for a period of 90 days from 
date of shipment from ThinkRF to the Customer.  If the remaining period on the 
original hardware warranty is greater than 30 days, then ThinkRF will honor this 
remaining warranty period.
THINKRF EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES AND 
CONDITIONS, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT 
LIMITATION, WARRANTIES, CONDITIONS OR REPRESENTATIONS OF 
WORKMANSHIP, MERCHANTABILITY, FITNESS FOR A PARTICULAR 
PURPOSE, DURABILITY, OR THAT THE OPERATION OF THE HARDWARE OR 
LICENSED SOFTWARE WILL BE ERROR FREE.  IN NO EVENT WILL THINKRF 
BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL 
DAMAGES. 

USE OF PRODUCTS IN HIGH RISK ACTIVITIES

 

THINKRF PRODUCTS ARE INTENDED FOR STANDARD INDOOR COMMERCIAL
USE.  WITHOUT THE APPROPRIATE NETWORK DESIGN ENGINEERING, THEY 
MUST NOT BE USED FOR ANY “HIGH RISK ACTIVITY”, as described in this 
paragraph.  Customer acknowledges and agrees that the products supplied 
hereunder are not fault-tolerant and are not designed, manufactured or intended for 
use or resale as on-line control equipment in hazardous environments requiring fail 
safe performance including but not limited to the operation of nuclear facilities, 
aircraft navigation or communication systems, air traffic control, direct life support 
machines, or weapons systems, in which the failure of products could lead directly to
death, personal injury, or severe physical or environmental damage, all of which are 
examples of “High Risk Activity”.  THINKRF AND ITS SUPPLIERS EXPRESSLY 
DISCLAIM ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH 
RISK ACTIVITIES.

Summary of Contents for P120
















Reviews: