Installing the product
13
2.1.3 Connecting the power cable
When the engine and electrical accessories are turned off, connect the car charger.
2
➊
➊
➋
➋
Connect the cigar socket power cable to the product’s
DC-IN power connector and insert the cigar jack into the
vehicle’s power socket.
• The hardwiring cable (optional) must be
professionally installed to the vehicle by a trained
mechanic.
• The location and specifications of the power socket
may differ by vehicle make and model.
• Use the authentic THINKWARE cigar socket power cable (optional). If you use another manufacturer's cable,
the product may be damaged or electrical fire or electrocution may result due to the voltage difference.
• Do not cut or modify the power cable yourself. Doing so may damage the product or the vehicle.
• For safe driving, arrange the cables to prevent the driver's vision from being obstructed or interfering with
driving.
2.2 Installing the rear camera (optional)
Refer to the following instructions to properly install the rear camera.
2.2.1 Selecting an installation location
Select a location on the rear windshield where there
is no defrost grid wire and the camera can record
the entire rear view.
• For vehicles with a sunshade attached to the rear windshield, select a location where using the sunshade
will not interfere with camera operation.
• The adhesive part of the rear camera should not touch the defrost grid.
