Thinkware DASH CAM F200 PRO, User Manual

Settings

27

Options

Description

Motion Detection Sensitivity

Select from 

Lowest/Low/Mid/High/ Highest

 for the motion detection mode 

sensitivity.

Record Timer

Select from 

Disabled/3hrs/6hrs/12hrs/24hrs/48hrs/72hrs

 for the record time.   

Battery Protection

Select from 

Enabled/Disabled

 for the battery protection.

Battery Cutoff voltage

Select from 

12V (11.6-12.3)/24V (23.2-24.6)

 for the battery cutoff voltage.

Wintertime Battery Protection

Select the month(s) to apply the battery protection feature.

• To use parking mode, you must install the hardwiring cable. If continuous power is not supplied to the 

product, the product will stop recording when the vehicle engine is turned off.

• The vehicle battery will not be charged while the vehicle is parked. If you record in parking mode for an 

extended period, the vehicle’s battery may be depleted and you may not be able to start the vehicle.

• For more information about parking mode, refer to "3.5 Using parking mode" on page 17.
• The battery cutoff voltage can be set only when the 

Battery Protection

 setting is set to 

Enabled

.

• If the off voltage value is too low, the product may consume the battery completely depending on the 

conditions like the vehicle type or temperature.

6.4  Setting road safety features

From the mobile viewer, tap 

Dash Cam settings 

>

 Road Safety Settings

 to manage the road safety features 

settings.

Options

Description

Safety Cameras

Select from 

Enabled/Disabled

 for the safety cameras.

Mobile Zone Alert

Select from 

Enabled/Disabled

 for the mobile zone alert.

Vehicle Type

Select the vehicle type from 

Sedan/SUV/Truck (Bus)

.

Initialize ADAS

In 

Initialize ADAS

, tap 

Initialize 

>

 OK

 to proceed with initializing.

LDWS  
(Lane Departure Warning)

Select from 

Disabled/Low/Mid/High

 for the LDWS sensitivity.

LDWS Speed

Select from 

50km/h / 60km/h / 80km/h / 100km/h

 for the LDWS detection speed.

FCWS  
(Forward Collision Warning)

Select from 

Disabled/Low/Mid/High

 for the sensitivity.

Low Speed FCWS

Select from 

Disabled/Low/Mid/High

 for the sensitivity.

FVDW (Front Vehicle Departure 
Warning)

Select from 

Enabled/Disabled

 for the FVDW feature.