Settings
27
5.3.7 Setting the battery cutoff voltage feature
You can set the voltage limit to stop recording at when using the Low Voltage Off feature. Refer to the
following instructions to set the voltage.
1
From the PC Viewer, click
Settings
>
Dash Cam Settings
>
Record Settings
.
2
From
Battery Cutoff Voltage
, select the desired voltage.
For vehicles using a 12 V battery (most passenger vehicles), adjust the
12V
setting. For vehicles using
the 24 V battery (trucks and commercial vehicles), adjust the
24V
setting.
3
Click
Save
.
If the Off voltage value is too low, the product may consume the battery completely depending on the
conditions like the vehicle type or temperature.
5.3.8 Setting the battery protection feature for wintertime
You can set the month(s) during the cold season to apply the low voltage protection level of the vehicle.
Refer to the following instructions to set the month(s).
1
From the PC Viewer, click
Settings
>
Dash Cam Settings
>
Record Settings
.
2
From
Wintertime Battery Protection
, select the month(s) to apply the battery protection feature.
3
Click
Save
.