17
3. Using recording features
3.1 Turning the product on or off
The product is turned on automatically and continuous recording starts when you turn on the ACC or start
the engine.
Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).
3.2 Learning about the file storage locations
Videos are stored in the following folders according to their recording mode.
On the mobile
viewer
Continuous
Continuous
Incident
Manual Recording Motion Detection
Parking Incident
In the memory
card
cont_rec
evt_rec
manual_rec
motion_
timelapse_rec
parking_rec
Play videos on Window/Mac computer or using the
THINKWARE DASH CAM LINK
. If you play videos by
inserting the memory card in devices such as a smartphone or a tablet PC, the video files may be lost.
A file name is composed of the recording start date and time, and the recording option.
REC_2020_07_01_10_25_30_F.MP4
REC_2020_07_01_10_25_30_R.MP4
REC_2019_07_01_10_25_30_GS.MP4
Recording conditions
• F: Front camera
• R: Rear camera (when optional rear camera is equipped)
3.3 Using the continuous recording feature
Connect the power cable to the product’s DC-IN power port and then turn on the vehicle’s electrical
accessories or start the engine. The voice guide will indicate that continuous recording has started.
During continuous recording, the product operates as follows.
Mode
Operation description
STATUS LED
Continuous
recording
During driving, videos are recorded in 1 minute segments and stored in the
"cont_rec"
folder.
(light on)
Incident
continuous
recording*
When an impact to the vehicle is detected, a video is recorded for
20 seconds (from 10 seconds before the detection to 10 seconds after the
detection) and stored in the
"evt_rec"
folder.
(flickers quickly)
* When an impact to the vehicle is detected during continuous recording, incident continuous recording starts with a
double beep sound.
