Product overview
9
1.2 Part names
1.2.1 Front camera (main unit) - front view
Speaker
Outputs the
voice guide and
buzzer sounds
to indicate the
product’s status.
Power button
• Press and hold to turn
off the product.
• Press to turn on the
product.
Wi-Fi button
Press to connect the
product to a smartphone
via Wi-Fi network.
Voice recording button
Press to enable or
disable voice recording.
Reset button
Insert the tip of a sharp
object to reset the product
when an error occurs.
Format button
Press and hold
to format the
memory card.
Manual recording
button
Press to
start manual
recording.
STATUS LED
Indicates the product's status.
Wi-Fi LED
Indicates the
Wi-Fi connection status.
Cradle connector
Used to connect the cradle.
Microphone
Used for voice recording.
• To reset the product, press and hold the voice recording (
) and manual recording (
REC
) buttons
simultaneously until you hear beeps.
• Refer to the following table to check the status of the product using the LED indicators.
LED
LED STATUS
Operation description
Security LED
(light on)
The product is turned on.
Wi-Fi LED
(light on)
In AP mode (Wi-Fi connected).
(flickers)
In AP mode (Wi-Fi disconnected).
STATUS LED
(light on)
The product is turning on.
(flickers)
SD card not reading.