background image

Using recording features

20

During continuous recording, the product operates as follows.

Mode

Operation description

Recording LED (REC)

Continuous 
recording 

During driving, videos are recorded in 1 minute segments and stored 
in the "

cont_rec

" folder.

 (light on)

Incident 
continuous 
recording*

When an impact to the vehicle is detected, a video is recorded for 20 
seconds, from 10 seconds before the detection to 10 seconds after 
the detection, and stored in the "

evt_rec

" folder.

 (flickers)

*  When an impact to the vehicle is detected during continuous recording, incident continuous recording starts with a 

double beep sound.

• Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The 

video recording does not begin until the product is completely turned on (booted up).

• When incident continuous recording starts, a double "beep" sounds as a notification. This function saves 

you time when checking the status LED to know the operating status of the product.

• To enable recording, you must insert a memory card into the product.

3.4  Recording manually

You can record a scene you want to capture while driving and store it as a separate file.

To start manual recording, press the manual recording 

(

)

 button. Then, manual recording will start with 

the voice guide. During manual recording, the product operates as follows.

Mode

Operation description

Recording LED (REC)

Manual 

recording

When you press the manual recording (

) button, a video will be 

recorded for 1 minute, from 10 seconds before to 50 seconds after pressing 
the button, and stored in the "

manual_rec

" folder. 

 (flickers)

3.5  Using parking mode

When the product is connected to the vehicle via the hardwiring cable (optional), the operating mode is 
switched to parking mode with the voice guide after the engine or electrical accessories are turned off.

• Parking mode operates only when the hardwiring cable is connected. The hardwiring cable (optional) 

must be professionally installed to the vehicle by a trained mechanic.

• To use all recording modes, you must insert a memory card into the product.
• Depending on the battery charging status of the vehicle, the duration of parking mode may differ. If you 

want to use parking mode for an extended period, check the battery level to prevent battery depletion.

Summary of Contents for Q800 PRO


























































Reviews: