6
Safety information
Read the following safety information to properly use the product.
Safety symbols in this guide
"Warning" - Indicates a potential hazard which, if not avoided, may result in injury or death.
"Caution" - Indicates a potential hazard which, if not avoided, may result in minor injury or property damage.
"Note" - Provides useful information to help users better utilize the product's features.
Safety information for proper use
•
Do not operate the product while driving a vehicle.
Distraction while driving may cause accidents and
result in injury or death.
•
Install the product in places where the driver's view is not obstructed.
Obstruction of the driver’s vision
may cause accidents and result in injury or death.
•
Do not use damaged power cables.
Doing so may result in electrical fire or electrocution.
•
Disconnect the power cable from the product when it will not be used for an extended period.
Failure to do
so may result in electrical fire or battery depletion.
•
Ensure that the product is out of the reach of children and pets.
If the product breaks, it may result in fatal
damage.
•
Do not expose product to direct sunlight or intense light.
The lens or internal circuitry may fail otherwise.
•
Avoid excessive humidity and do not allow any water to enter the product.
Electronic components inside
the product may fail if exposed to humidity or water.
•
Do not disassemble the product or subject the product to impact.
Doing so may damage the product.
Unauthorized disassembly of the product voids the product warranty.
•
Do not apply excessive force when pressing the buttons.
Doing so may damage the buttons.
•
Ensure you are inserting the memory card correctly before inserting it to the product.
The memory card
slot or the memory card may be damaged if it is inserted incorrectly.
•
When connecting the power cable to the product, ensure that the connection between the cable plug
and the power cable connector on the product is secure.
If the connection is loose, the power cable may
become disconnected due to vehicle vibration. Video recording is not available if the power connector is
disconnected.