Pairing Instructions
Please ensure your compatible Echo devices have been setup and update to the latest version before
pairing with Smart Blind. You can say "Alexa, check for software updates" to check.
3.
Press and hold the Set “□” button on the Smart Blind body for more than 5 seconds until the
status of the LED doesn’t change. Then release the Set button, the LED will flash rapidly after 10
seconds indicating that it is in pairing mode now.
a.
Say "Alexa, discover my devices", then Alexa will find the Smart Blind automatically.
b.
Position the Smart Blind on the extension brackets. Frist, put the one side of the top of the blind into
the extension brackets, then push the blind as show until you hearing
"
Clicks
"
and the transparent
buttons on the extension brackets pops up indicating that the other side is installed.
4.
8
1
2
3
Note:
Please shake the blind to ensure the blind and the Extension Bracket are in close contact. And
make sure the buttons are facing indoor to receive the Blind Remote control signal.
Adjust the height of the curtain according to the actual situation.
5.
Press the UP button on the blind body to let the blind reach the top position (0% position).
Then press the Down button, Smart Blind will find the bottom position (100% position) and stop
automatically when the bottom sensor has been triggered.
a.
b.
9
Wall
Wall
Wall
