Pairing with Hubitat
Pairing steps:
Website: http://find.hubitat.com/
Remove the kickstand on the back of the Temperature and
Humidity Sensor carefully, open the battery cover on the
back, remove the plastic insulation sheet and the sensor is
powered on; Or press and hold the side button on the left
side of the sensor for 5 seconds and release the hold; The
blinking cloud icon on the the LCD screen indicates the
sensor is in pairing mode.
Visit your Hubitat Elevation hub device page from your
web browser, select the Devices menu item from the side-
bar, then select Discover Devices in the upper right.
1)
2）
12
