B.
If you have the
Echo Plus,
you can connect it
directly with the RealitySwitch using the steps
below.
Install the Amazon Alexa app on your smart
phone or tablet. Register and log in to the app,
and follow the tips shown to set up your Echo
Plus.
C. If you have a 3
rd
compatible Wi-Fi to ZigBee
Hub(e.g.:Wink) , you can connect it.
Please make sure your switch is in pairing mode
and refer to the user guide of the corresponding
Hub.
Note:
If none operation after installing the
batteries for 3 minutes, the Switch Plus will
become a normal switch with button function.
To solve it, you can re-pair the RealitySwitch
Plus via factory reset or just remove the batteries
over 10 minutes, and then install the batteries
again.
Note: Please move
your RealitySwitch
Plus close to the
Echo Plus.
