19
SHIFT RED User Manual
ⓒ
this is engineering Inc. All Rights Reserved.
Aircraft Powering On / Pairing with the Controller
1. Press and hold the power button for two seconds after inserting the battery into
the aircraft, and the aircraft will power on with the power LED turning solid orange.
If the aircraft has successfully started up (taking approximately 9 to 10 seconds),
the front LED turns solid blue, indicating that it is ready for flight.
This section describes how to control the drone for takeoff, landing, and flight, and
take actions for an emergency stop. Before proceeding with each maneuver, read
the ‘Pre-flight inspection(14p)’ and ‘Precautions during flight(15p)’ subsections under
Section 02 Precautions. The drone has a flight altitude limit of 25 m (82 ft), and
the maximum flight distance(maximum control range) may vary with surrounding
signals. Exercise caution not to let the drone out of your sight; an uncontrolled drone
may disappear or cause accidents.
2. When the aircraft and controller are ready for flight, the front LED and power LED
on the bottom blink three times, and the propellers rotate in order.
(For how to turn on the controller, see ‘Controlling
the Drone’ > ‘Controller
Powering On / Pairing with the Aircraft(21p)’)
After the power LED turns solid, the aircraft should be placed on a horizontal surface to start up with the front
LED turning solid.
Long-press the power button
Powers on
Light On
03
CONTROLLING THE DRONE