background image

59

SHIFT RED User Manual

ⓒ 

this is engineering Inc. All Rights Reserved.

Firmware updates are provided to optimize the performance of SHIFT RED. Update 
the controller to the latest firmware by following the procedure below:

1.  Download  and  unzip  the  'Firmware  updater'  file  from  TIE’s  support  download 

page(www.thisiseng.com/support/download/). Once unzipped, SHIFT Updater folder 
will generate.

2.  Download the latest controller firmware from the download page. Make sure 

that the firmware file and the Update.exe is in the same folder and run SHIFT 
Updater.exe.

3.  The controller needs to be turned off before connecting to a computer. Connect 

the USB cable directly to the computer and connect the controller with the Jog-
button pressed down. Refrain from using a USB hub and directly connect the USB 
cable with the computer.

4.   The SHIFT Updater will identify and compare firmware versions as the controller 

is successfully connected with the computer. Please proceed with the update by 
following the guideline presented on SHIFT Updater. Do not remove the controller 
while the update is in process.

5.  Once the update is finished, the controller will automatically switch to charging 

mode.

6.  For the best flight experience, this is engineering recommends users to update to 

the latest firmware versions.

Firmware Updates to Controller

Before starting the firmware update, make sure that the battery is charged more than a half. The battery 

condition can be checked in the 'SHIFT Drone' application.

Summary of Contents for Shift Red





































































Reviews: