1.4 Selecting the operating mode
The following functions can be activated by setting the operating
mode switch (see 1.3):
Call triggers status report:
If you call the phone number of the SIM card inserted in GSM-pro,
GSM-pro automatically ends the call and sends a status report to
the caller (see 2.1, Fig. 5).
Call arms / disarms WiPro and triggers status report:
If you call the phone number of the SIM card inserted in GSM-pro,
GSM-pro automatically ends the call, arms or disarms WiPro and,
after successful switching, sends a status report.
Status report contains U1 and U2:
The status report contains additional information on the operating
voltage (U1) and the voltage at the measurement input U2.
Table: Operating modes
Switch
position
Call triggers
status report
Call arms / disarms WiPro and
triggers status report
Status report contains
U1 and U2
0
X
1
X
X
2
X
3
X
X
E
Deleting the target phone numbers (see 1.9)
F
GPS diagnosis (see 1.7)
GSM-pro
manual Page
3
Summary of Contents for GSM-pro
Page 18: ...Handbuch GSM pro Seite 16 Notizen...
Page 35: ...Notes GSM pro manual Page 16...
