2.1 Explanation of the messages received
Here you see possible messages that can be sent by GSM-pro:
1 Burglary alert
2 Theft alert
3 Gas alert
4 Manual alert
5 Status report
6 Help SMS
Every SMS contains the following information:
System status:
ON / OFF, burglary door / window, gas, theft,
manual alarm
UTC:
Time of incident (indicated in coordinated
universal time).
Transmitted only if GPS receiver
is connected.
Pos:
Current position of vehicle.
Transmitted only
if GPS receiver is connected.
Speed:
Current speed of vehicle.
Credit balance:
Current credit on SIM card
(only for pre-paid cards)
A status report (5) includes additional information (see 2.3).
1 Alert message: You receive such a message whenever WiPro
reports an alert.
2 Theft alert: You receive this message if WiPro is armed and
your vehicle is further than 1500 m from the original location.
A theft alert is a silent alert. This means that neither the flashers
nor the siren are activated. Both of these can be activated via SMS
as described in section 2.2.
3 Gas alert: This message is sent when WiPro reports a gas alert.
4 Manual alert: This message is sent when WiPro is activated
by triggering a panic alert.
5 Status report: You receive this message only on request,
as described in section 2.3. The status report also includes
information on the receiving signal. A more negative value
indicates better reception.
6 Help SMS: This message is sent when GSM-pro receives
an invalid SMS from a target number.
The possible commands are listed in this message.
GSM-pro is also equipped with an automatic shut-off function.
If the power supply permanently drops below 11.2 V GSM-pro
switches to stand-by mode to save the battery.
In this case an SMS with the voltage level is sent. When the voltage
rises above 12.5 V again the unit switches back to normal operation.
GSM-pro manual
Page
10
Summary of Contents for GSM-pro
Page 18: ...Handbuch GSM pro Seite 16 Notizen...
Page 35: ...Notes GSM pro manual Page 16...
