2-2
2. Precautions
2.
Precautions on Use
Linear Bushing
2-3
Precautions on Use
C A U T I O N
Prevent dust
z
Prevent foreign materials, such as cutting chips or coolant, from entering the product. Failure
to do so could damage the product.
z
Prevent foreign materials, such as cutting chips, coolant, corrosive solvents or water from
getting in the product by using a bellows or cover when the product is used in an environment
where such a thing is likely.
z
If foreign materials such as cutting chips adhere to the product, clean the product and then
replenish the lubricant.
z
Small strokes can inhibit the formation of an oil film between the raceway and the area of
contact for rolling elements, resulting in fretting. Therefore, be sure to use a type of grease
with high fretting resistance properties. We recommend periodically adding stroke movement
for―approximately―the―outer―cylinder―length―to―help―ensure―that―an―oil―film―forms―between―the―
raceway and the rolling elements.
Maximum temperature
80°C
Max
z
Do not use this product if the external temperature exceeds 80 °C. If used in excess of this
temperature, there is a risk that the resin and rubber parts may deform or become damaged
(except the heat-resistant type).
Handle with care
z
Do not forcibly drive a pin, key, or other positioning device into the product. This could create
indentations on the raceway and impair the product's functions.
z
Inserting the shaft while tilted risks foreign material entering, internal parts being damaged,
and―rolling―elements―dropping―off.
z
Using while the rolling elements are removed may cause early damage.
z
A lack of rigidity and accuracy of mounting components may cause the bearing load to
localize,―reducing―the―performance―of―the―bearing―significantly.―Therefore,―consider―carefully―
the rigidity and accuracy of the housing and base, and the strength of the securing bolts.
Falling objects
z
If any of the rolling elements fall, discontinue use and contact THK.
www.thk.ru
тел. +7(499) 703-39-86
sales@thk.ru
