6-4
6. Lubrication
6.
Lubrication
LM Guide
6-2-3
Manual Greasing
Generally, replenish grease periodically by feeding it through the grease nipple provided on the
LM Guide, using a grease gun. (Figure 6-1)
Figure 6-1 Greasing Using a Grease Gun
6-2-4
Forced Greasing/Lubrication Method
With this method, a given amount of lubricant is forcibly fed at set intervals using an automatic
pump. (Figure 6-2)
Although a special lubrication system using a pipe or the like needs to be designed, this method
reduces the likelihood of forgetting to replenish lubricant.
This method is used mainly for oil lubrication. If using grease, it is necessary to examine the
appropriate pipe diameter and the required grease consistency.
Figure 6-2 Forced Greasing/Lubrication Method
