background image

2-1

2. Precautions

LM Guide

2.  

Precautions on Use

2-1

 

Safety Related Warning Displays

This manual uses the following safety related warning displays. Descriptions containing safety 
related warning displays are serious and must be followed. 

  Warning

"A matter which, if mishandled, could result in 

death or serious injury."   

  Caution

"A matter which, if mishandled, could result in 

physical injury or material damage."   

 "Prohibited (never do this)"   

 "Must (always do this)"  

2-2 

 Handling

C A U T I O N

Handle with care

 

z

Please use at least two people to move any product weighing 20 kg or more, or use a dolly or 

other conveyance. Failure to do so could cause injury or damage the product.

Do not disassemble

 

z

Do not disassemble the parts. This could impair the product's functions.

Falling objects

 

z

Tilting an LM block or LM rail may cause it to fall by its own weight.

 

z

Take care not to drop or strike the LM Guide. This could cause injury or damage the product. 

If the product receives an impact, it could impair the product's functions, even if the product 

looks intact.

Handle with care

 

z

When assembling, do not let the LM block come off the LM rail.

 

z

Note that if you place your finger in an LM rail mounting hole, it may get jammed by the LM 

block, risking injury.

 

z

When handling the product, wear safety gloves and safety boots, etc., as appropriate to en-

sure safety.

Summary of Contents for LM Guide
























Reviews: