1 Powering on
The knob located on the front in the middle between the speakers and above
the bass reflex tube, functions as the power switch and volume control. Turn it
clockwise, the first click will power the iBox on, the rest of the rotation will
regulate the volume upwards, always start with a low volume level when
connecting your audio source.
2 Connecting the audio source to your iBox
2.1 Selecting the audio source input
The source selector switch is located on the back in the lower right hand
corner. The amount of settings is determined by the amount of options
added to your iBox. If you have a full option iBox, the settings from left to
right, clockwise will be as follows: 1 AUX input, 2 Guitar input, 3 Bluetooth, 4
WiFi in the order of the most input simple to the most advanced.
If you opted for WiFi only for example, there will be only 2 settings: 1 AUX
input, 2 WiFi.
2.2 Aux input
Make sure your iBox is switched off and the AUX input is selected with the
source selector switch, then plug in the provided mini jack cable or a similar
high quality audio cable into the AUX input bus located in the lower left hand
corner on the back of the iBox, slightly higher and to the right of the charge
bus (do not insert the mini jack cable into the charge bus). Then connect the
audio source to the other end of the cable. Now start playing music on a low
volume on the audio device and switch on your iBox, gradually increasing the
volume until the desired level is reached. When disconnecting the audio
source it is recommended to switch your iBox off until it is reconnected again
or switched to another connected input source.
2.3 Guitar input (optional)
Make sure your iBox is switched off and the Guitar input is selected with the
source selector switch, then plug in your guitar cable into the guitar input port
Summary of Contents for ibox
Page 1: ...iBox owners guide ...
