By connecting external triggers to the device, you can mix further percussion sounds into the
loop.
During loop playback you can modify the loop variation (A to D) for all four tracks together by
means of the
[+ | –]
rotary knob . Alternatively you can modify the variation of a single track by
softly striking the related pad, or mute the track by hardly hitting the pad. The display shows
the variations A, B, C and D for all tracks. The icons of the pads which are played are high‐
lighted by a dropshadow.
To switch to another loop, you must terminate the current loop first.
To change the playback speed of the loop, press and hold down the
[CLICK]
button for two
seconds. As soon as
‘TEMPO’
flashes on the display, you can adjust the speed within a range of
40 to 240 beats per minute using the
[+ | –]
rotary knob.
The metronome function is available in KIT mode only. Press the
[CLICK]
button to activate or
deactivate the metronome. To set the tempo, volume and time signature of the metronome,
press and hold down the
[CLICK]
button for two seconds. Use the
[+ | –]
rotary knob to select
the desired options. Then press
[ENTER]
to move to the next parameter. Confirm each of your
chosen values with
[ENTER]
.
Metronome
Device functions
percussion pad
22
