The DP-2000’s recording function allows you to record loops of your own:
n
Direct recording with default settings
In this recording mode, you can record a four-bar loop in overdub mode without making
any further settings.
1.
Open the desired kit and press the button to activate the recording mode.
ð
The
[PHRASE]
button lights up and the button starts flashing to indicate that the
device is ready for recording.
2.
To start recording, press the button again and play your loop.
3.
To stop recording, press the button.
4.
Press the
[EXIT]
button to save the loop.
ð
‘SavePhrase’
appears on the display.
5.
Use the
[+ | –]
rotary knob to select a loop number (01 to 30) for saving your recording
and confirm your selection by pressing
[ENTER]
.
Recording function
Device functions
percussion pad
26
