1.
Attach the holders for the cymbals (7) and the Hi-hat (8) to the joints for the cymbal and the Hi-hat (9).
2.
Then tighten the fixing screws (22) with the drum key (21).
1.
Unscrew the wing nuts from the holders for the cymbals (7) and the Hi-hat (8) and take the felt washers off the holders.
2.
Place the cymbals (14) as shown in the figure on the holders.
3.
Place the felt washers on the cymbals (14) and fix the cymbals with the associated wing nuts on the holders.
4.
Attach the Tom pad (12) to the side arm (5) and the Snare pad (13) to the boom of the side support tube (2).
Assembly
HD-120
11
