Mounting the Hi-hat on the rack
1.
Unscrew the wing nuts from the Hi-hat holder (11) and take the felt washers off the holders.
2.
Place the Hi-hat (12) as shown in the figure on the holder.
3.
Place the felt washers on the cymbals and fix the Hi-hat (12) with the associated wing nut on the holder.
Setting up the bass drum pedal
1.
Engage the bolt of the foot machine (17) into the provided hole on the bass drum pad (16).
2.
Place the beater (18) into the hole provided on the rotary head of the pedal (16) and tighten the fastening screw with the
drum key (23).
Aligning the beater
Pay attention to the correct orientation of the beater. The beater may only hit the bass drum pad with the plastic side, otherwise the
mesh head clothing may break.
Assembly
MPS-450
11
