2
Taking Care of Your Digital Drum Set
Thank you for purchasing this digital drum module. The drum module has been
developed to act and play like a drum set but with greater ease. Before you use
the instrument, we recommend you read through this manual.
Location
•
Do not expose the unit to any of the following conditions :-
•
Direct
sunlight.
•
High temperature (near a heat source or direct sunlight).
•
Excessive humidity.
Power Supply
•
Make sure a suitable AC-Adaptor is used and that the input voltage specified
on the AC-Adaptor`s label corresponds with your country’s AC-Outlet voltage.
•
Turn the power switch to OFF when the instrument is not in use.
•
An AC adaptor should be unplugged from the AC outlet if the instrument is not
being used for an extended period of time.
•
Unplug the AC adaptor during electric storms.
•
Avoid plugging the AC adaptor into the same AC outlet as an appliance with
high power consumption, such as electric heaters or ovens. Also avoid using
multi-plug adaptors since these can result in reducing the sound quality,
operation errors, and possible damage.
Turn power OFF when altering connections
•
To avoid damage to the instrument and other connected devices, turn OFF the
power switches of all related devices prior to connecting or disconnecting
cables.
Handling and Transport
•
Never apply excessive force to the controls, connectors or other parts of the
instrument.
•
Always unplug cables by gripping the plug firmly, but not pulling on the cable.
•
Disconnect all cables before moving the instrument.
•
Physical shocks caused by dropping, bumping, or placing heavy objects on
the instrument can result in scratches and more serious damage.
Cleaning
•
Clean the unit with a dry soft cloth.
•
A slightly damp cloth may be used to remove stubborn grime and dirt.
•
Never use cleaners such as alcohol or thinners.
•
Avoid placing vinyl objects on top of the unit (vinyl can stick to and discolour
the surface).
Electrical interference
•
This instrument contains digital circuitry and may cause interference if placed
too close to radio or television receivers. If this occurs, move the instrument
further away from the affected equipment
.
