3
Setting up the rack
Please note that this guide only contains suggestions. It is not intended to dictate categorically the height at which you set up the
pads. You can adjust or move all the parts of the set in any way that your like.
The manufacturer supplies the rack virtually completely assembled. From the drummer's point of view, the vertical rack rod on
which the three horizontal rods are fastened is the left-hand side of the rack.
Insert the two supplied rubber feet onto the bottom two cross-bars on which rubber feet have already been mounted.
Turn the feet outwards such that the longer part points inwards as shown on the right-hand side of this picture.
Now you can turn all the horizontal rack rods to the side and fasten the cymbal arms to the clips that are intended for this on the
rack.
In addition, you can point all the L-pieces of the tom holders upwards and also set the height of the horizontal rods.
Setting up the rack
Millenium Transformer E-A
7
