Symptom
Remedy
Device not working, no light, fan not working.
1. Check the power connection and main fuse.
2. Check the safety key switch.
3. Check the external safety switch (e.g. emergency stop).
No response to the DMX controller
1. If the display shows a flashing number, for example “001”, no DMX signal is
being received. Check the DMX connectors and cables to see if they are prop‐
erly linked.
2. If the display does not flash and there is no response, check the address set‐
tings and DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to high-voltage cables
that may cause damage or interference to the DMX interface circuit.
If the procedures recommended above do not succeed, please contact our Service Center. You
can find the contact information at
www.thomann.de
.
Troubleshooting
DJ Lase BlueStar MK-II LED
47
Summary of Contents for Stairville DJ Lase BlueStar MK-II LED
