7
[ON/OFF]
Mains switch. Turns the device on and off.
8
[DMX In]
DMX input, designed as 5-pin XLR chassis-mounted plug
9
[DMX Thru]
Passive DMX output (XLR chassis socket, 5-pin) for looping the signal to a connected device. This output is only
active, if the
[Pass Thru / Terminated]
switch is not pressed.
10
[Out 1]
…
[Out 8]
8 × active DMX outputs (XLR chassis sockets, 5-pin) to buffer, amplify and distribute the signal to other DMX chains,
three- and five-pin type with control LEDs for the signals on the DMX data lines of the DMX outputs. The red LED
indicates the operational readiness of the DMX outputs. The green LED lights up when a DMX controller is connected
and a signal is transmitted on the data line.
Connections and controls
DMX splitter
20
Summary of Contents for Stairville DMX Splitter 8 USB 3 pin
