5
8.
9
Press this button once to re-start the currently playing track. Press this button repeatedly to
select previous tracks for playback.
9. +10
Use this button to access higher MP3 track numbers more quickly, as the unit 10
tracks each time you press the button. This works only if there are more than 10 suitable files
in the current folder.
10.
:
Press this button to skip playback to the next track.
11. CUE
If you press this button during playback, playback will be skipped to the beginning of the
current track. The CUE button is lit then. If you keep the CUE button on the front panel
pressed, playback will be resumed as long as you keep the button pressed (in CD mode only).
12.
4;
Press this button after inserting the disc to start playback. The button is lit during playback. If
you press this button during playback, playback will be paused and the button flashes. Then
press the button again to resume playback.
13. PITCH
Use this control to increase or decrease the playback pitch by ± 16%. This function is only
available when the PITCH button is lit.
14. CUE LEVEL
To adjust the level of the headphones output.
15. MASTER LEVEL
To adjust the level of the LINE output.
16. PITCH
If you press this button, the setting of the pitch control becomes available. When the pitch
function is activated, this button is lit.
17. PHONES
Connect your headphones with a 3,5mm jack to this socket. The output level is subject to the
CUE LEVEL volume control.
18. EJECT
Press this button to eject the inserted disc.
Tip:
The disc can only be ejected, if you have stopped playback before using the
<
button of
the RC, or if you have paused it using the
4;
button on the front panel.
19. Display
The display shows playback information and ID3 tags in MP3 mode. The progress bar in
the upper left area gives you a clue about the estimated playing time (1 element = track‘s
beginning, 10 elements = end of track).
20. REMOTE SENSOR
The remote sensor receives the infrared signals from the RC. Don‘t place any objects in front of
the sensor, don‘t put stickers here, otherwise the device will not react to the RC.
21. Disc slot
Carefully insert half of the disc here. Then the CD drive takes over the transport. During the
reading of the disc information the EJECT button is flashing. Afterwards the
4;
button is
flashing to indicate the unit is in PAUSE mode.
