DS 2418 • USER’S MANUAL
6
Installation
Select a location with sufficient circulation of air. Permanent
overheating can damage the device.
This unit is designed to be fitted into a 19” rack. Secure the
device with screws to the rack.
When installing into a 19” rack please ensure that warm air
can escape from the rack and that there is adequate distance
between the individual devices. The rear wall of the rack
should be opened when operating the devices.
Cleaning and Maintenance
Never immerse the device into water or any other
liquid! Never let any liquid get into the housing. This
would damage the device or cause a short circuit.
Clean the surface of the housing with a damp cloth. Never
use cleaning agents that contain alcohol, petrol, solvents, or
any aggressive substance. Do not use chemical fiber cloth to
wipe the cover to avoid the fading of the painting.
Disposal
Never throw the device into the regular household
waste at the end of its useful life. This product is
subject to the European Directive 2002/96/EC.
Dispose of the device through an approved disposal centre
•
or at your community waste facility.
Observe the current existing regulations. In case of doubt
•
contact your disposal facility.
The packaging is certified via a dual system. Take all
•
packaging materials to an environmentally friendly
disposal facility in compliance with the local regula-
tions.
Summary of Contents for the t.racks DS2418
Page 1: ...ENGLISH DS 2418 Distribution Splitter USER S MANUAL ...
Page 4: ...DS 2418 USER S MANUAL 4 ...
Page 5: ...DS 2418 USER S MANUAL 5 ...
Page 8: ...WWW THOMANN DE ...