Seite 29 von 36
6. Troubleshooting
Malfunction /
Problem
Possible
causes
Solution
Glasses still have
water spots or
lime recess on
them
Glasses may
have already
been dry
The glasses must by wet directly from the
dishwasher or placed into a water bath
before polishing
After polishing
the glasses have
streaks
The brushes may
be dirty
Wash the brushes
(see chapter 5.2
Washing the brushes
)
The brushes do
not rotate
The motor or
belts are
damaged
Contact a service technician
The heater does
not work correctly
The heating
element is defect
Contact a service technician
Champagne
glasses do not fit
on the small
brush
The glass rim is
smaller than the
brush diameter
A mini brush is required. This is included and
can be ordered on demand. Refer to the
spare parts list on page 30-31
en
