Seite
28
von
48
2.3 General safety instructions
Warning!
Death or serious injury may accur by means of electrical shock
>
Never install or operate the machine with a damaged power cord.
>
By suspicion of damage, for example an electrical fault smell, disconnect
the machine from the power circuit immediately and contact the Dörr-service
staff.
>
A damaged power cable can only be repaired by a Dörr-service member or
a from Dörr authorized service technician.
>
Make sure the power cable is never placed near a hot surface.
>
Make sure the power cable is never pinched or brushed along a sharp edge
or surface.
>
Never open and repair the machine yourself. Make no changes to the
machine which are not listed in this manual. This device contains electrical
current-carrying parts. After opening, the risk of death or serious injury could
occur. Repairs can only be made by Dörr authorised service technicians
with original Dörr spare parts and accessories.
>
Never expose the machine to gushes or jets of water.
Caution!
Risk of injury
>
Any installed safety components are not to be changed or demounted.
>
Never put your hands in the machine.
>
To prevent cuts always insert cutlery by holding the handle of the cutlery.
>
Never touch hot parts.
>
Never let the power cord hang loose. It could get damaged or to damaged
to people (for example: tripping over…).
>
Before performing any cleaning or maintenance work be sure that the power
switch is turned off to “O” and the power cord is disconnected.
>
Turn the machine off when not using it for a longer period of time.
>
This device must be installed to an appropriate connected power
circuit.(See page 15)
>
Exclusively use the original Dörr Polishing Granulate SG 8000 as well as
original Dörr cleaning products.
>
Install the device far from the reach of children.
>
Persons, including children, who by reason of physical,sensual or mental
complications or inexperience or ignorance may not operate the machine
without guidance from a responsible person.
>
Persons who are not capable of reading or cannot read this manual`s
language must be educated and trained about the contents of this manual
and operation of the machine.
en
Summary of Contents for TD 8000 M16
Page 47: ...Seite 47 von 48 12 Notes en...
