5
Folding
Unfolding
Take hold of the buggy by the top side of the
push bar and firmly pull it open (the sliders
will lock audibly into place). Fold up the
side plates of the seat to an upright position
so that they lock securely into place. If the
side plate’s locking pin does not lock into
place automatically, give the head of the pin
a slight turn. Tighten the lever on the back of
the buggy. Set the height-adjustable push bar
to the desired position using the buttons on
the sides.
Folding up (minimum size)
Release the two side plates by pulling out
the locking pins (to be found between the
side plates and the frame, see fig. 1) and fold
them down towards the middle of the seat.
Release the quick-release mechanism on the
back of the buggy.
Pull up the sliders on the left and right bars
and hold onto the safety bar mounted on the
right. Use your upper body to push the push
bar forwards and fold the buggy.
TIP:
To avoid the front wheels coming
into contact with the rear axle when
folding the buggy, you can give the
steering forks on the front wheels a
slight turn.
Fig. 1
